Macros

 

<MACROS:filename>     Load macros from filenamefilename will be used as default macros (instead of MixMacros.ini)
<MODEMACROS:filename>     Load macros from filename for this modeThis command sets “filename” to store macros for this mode
<EDITMACRO:name>     Edit macro with specified nameThis command brings Edit User Macro dialogueThis command can be used to edit Event macros
<HIDETEXT>     Don’t show Macro text in window
<SHOWTEXT>     Show Macro text in window
<ONQSOBEFORE:name>     Run Macro name if QSO before
<QSOCMDDDE:command>     DDE command to external program
<WX?>     Enter weather data that will be recalled by the <WX> macro

 
Mode

 
<AFCON>     Switches AFC On
<AFCOFF>     Switches AFC Off. See <LOCKRX> below
<AFC>     Toggle AFC
<INVON>     Turns invert on
<INVOFF>     Turns invert off
<INV>     Toggle invert
<SNAPON>     Switches Snap On
<SNAPOFF>     Switches Snap Off
<SNAP>     Toggle Snap
<SQUELCHON>     Switches squelch on
<SQUELCHOFF>     Switches squelch off
<SQUELCH>     Toggle squelch
<LOCKRX>     Lock RX Frequency. Turns waterfall flag blueDoes not inhibit AFC. RX fq may still wander
<LOCKRXTOGGLE>     Toggle Lock RX
<UNLOCKRX>     Unlock RX Frequency
<LOCKTX>     Lock TX Frequency. Turns waterfall flag red
<LOCKTXTOGGLE>     Toggle Lock TX
<UNLOCKTX>     Unlock the TX Frequency
<MODESETTINGS>     Displays mode settings dialogue box
<THRESHOLD>     Displays the Squelch dialog box

 
Auto CQ

 
<ACQ>     Pause and restores AutoCQ mode
<ACQDELAY>     Set the AUTOCQ delay
<ALARM:string>     Beeps when string is received but see <OnAlarm> event macro
<ASAUTOCQ>     Initiate the following string as AUTOCQ
<AUTOCQ>     Initiates the auto CQ routine as set under Options | AutoCQ (See below)
<AUTOCQRESUME>     Resume an interrupted AUTOCQ

 
Contest

 
<SP:0>     Run mode on (also <SP0>)
<SP:1>     Search and pounce mode on (also <SP1>)
<SP>     Switch to Run mode (same as SP:0)
<S/P>     Toggle between Search and Pounce and Run
<OnSP0>     Execute when switch to Run mode
<OnSP1>     Execute when switch to Search and Pounce mode
<STATS:GENERATEQTC>     Send 10 QTCs
<STATS:REPEATQTC>     Repeat the same 10 QTCs
<CLEARNRR>     Clear the NRR received field
<INCNRR>     Increment the NRR field if it is an integer
<INT>     Output depends on S&P or Run mode and content of CALL and NRR fields
<INTELIGENT>     Same as <INT>
<INTQRL>     Called in S&P mode when Call is empty
<INTDE>     Called in S&P mode with a new call but NRR empty
<INTQSL>     Called in S&P mode with a new call and NRR complete
<INTCQ>     Called in Run mode when Call is empty
<INTGA>     Called in Run mode with a new call but NRR empty
<INTQB4>     Called in Run mode with a previous QSO call
<INTQRZ>     Called in Run mode with new call and NRR complete

 
Rotor

 
<ROTOR:LP>     Turn rotor to the Long Path for the station in the <CALL> field
<ROTOR:SP>     Turn rotor to the Short Path for the station in the <CALL> field
<ROTOR:n>     Turn rotor to the specified azimuth using n
<ROTORCMD:command>     Send command to the rotor port
<ROTORCMDHEX:command>     Send hexadecimal command to the rotor port

 
CW

 
<LANGUAGE:xxx>     Select languageA language must have a corresponding xxx.cwt file
<FORCELANGUAGE:xxx>     Force receiving as xxx
<WPM:-n>     Decrease the CW speed by n
<WPM:+n>     Increase the CW speed by n
<WPM:n>     Set the CW speed to n
<WPM:RX>     Match the TX speed to the RX speed
<WKHEX:hex command>     Send hex command to WinKey
<WKTEXT:text>     Send text to WinKey
<WKPOT>     Disable WinKey pot
<WKNOPOT>     Enable WinKey pot

 
Hell

 
<SET FILTER:width_in_hz>     Set filter width
<SET FONT:n>     Set the font to n
<SET RXFQ:fq_in_hz>     Set the RX frequency
<SET SCALE:n>     Set the scale
<SET SUBMODE:submode>     Set the Hell submode (FELD, FM105, FM245)
<SET TXFQ:fq_in_hz>     Set the TX frequency

 
MFSK

 
<PIC:filename%2000>     Sends filename in high resolution black and white
<PIC?N>     Same as selecting File->Send Picture->B/W..opens dialog box to select picture file, sends in black and white
<PIC?N%C>     Same as selecting File->Send Picture-> Colour…opens dialog box to select picture file, sends in colour

 
Olivia

 
<GET OFFSET>     Get frequency offset
<GET RATE>     Get sample rate difference
<GET SN>     Get s/n ratio
<SET BW:n>     Set bandwidth in hz
<SET TONES:n>     Set number of tones

 
Contestia

 
<SET BW:n>     Set bandwidth in hz
<SET TONES:n>     Set number of tones

 
RTTYM

 
<SET BW:n>     Set bandwidth in hz
<SET TONES:n>     Set number of tones

 
RTTY

 
<LETTERS>     Forces letters
<NUMBERS>     Forces numbers
<SHIFT:shift_in_Hz>     Sets the RTTY shift in Hz
<BAUDRATE:baudrate>     Sets the baudrate

 
SSTV

 
<FONTBOLD:n>     Set font bold (n=1 on, n=0 off)
<FONTFACE:name>     Set the font face name
<FONTITALIC:n>     Set font italic (n=1 on, n=0 off)
<FONTSIZE:n>     Set the font size
<FROMCLIP>     Load picture from clipboard
<LIMITSCANLINES:n>     Send only n lines
<LOADPICTURE:filename>     Load picture with header
<LOADPICTUREONLY:filename>     Load picture only
<LOCKMODE>     Lock the SSTV mode
<PLACETEXT:x:y:text>     Place text at position x,y
<PLACETEXT:x:y>     Place cursor at position x,y
<PUTHEADER:filename>     Put filename header file
<PUTRXPICT:x0:y0:x1:y1>     Put received picture into the specified rectangle
<TEXTSTYLE:n>     Set current text style
<UNLOCKMODE> –     Unlock current SSTV mode

 
Event

 
<OnAlarm>     Execute after an <ALARM> event. Beep is cancelled
<OnOpenTelnetWindow>     Execute after open of Telnet window
<OnCloseTelnetWindow>     Execute after close of Telnet window
<OnOpenTNCWindow>     Execute after open of TNC window
<OnCloseTNCWindow>     Execute after close of TNC window
<OnCR#>     Execute when Enter is pressed with focus in log field #
<OnCR>     Execute when focus in log (also see <INT>)
<OnStartMixW> –     Execute when Mixw starts
<OnEndMixW>     Execute during close of Mixw
<OnStartMode>     Execute when mode is entered
<OnEndMode>     Execute on leaving current mode
<OnEnter#>     Execute when band# is entered (set in bands.ini file)
<OnLeave#>     Execute when band# is exited (set in bands.ini file)
<OnGrabCall>     Execute if two same calls are received
<OnGrabCallTx>     Execute when call is grabbed from keyer
<OnGrabNumber>     Execute when (serial) number is grabbed
<OnSaveQSO>     Execute when QSO is saved
<OnRemoveQSO>     Execute when QSO is removed
<OnRX>     Execute when RX is initiated
<OnTX>     Execute when TX is initiated
<OnEscape>     Execute when Escape key pressed
<OM>     Execute if <NAME> is called and Name field in the log is empty
<OnAPPCommandxx>     Execute when multimedia key xx is pressed